Overview; Device Elements; Colour Coding; Symbols On The Machine - Kärcher HDS 7/9-4 M/MX Mode D'emploi

Overview

Device elements

Figure 1
1 Cover
2 Support for spray lance (on both sides)
3 System care Advance RM 110/RM 111
4 Steering roller with fixed position brake
5 Fastening point for transport (on both
sides)
6 Wheel
7 Water supply set
8 High pressure connection
(M/S only)
9 O-ring set (for replacement)
10 High pressure hose
11 Hand spray gun
12 Spray lance
13 High-pressure nozzle (stainless steel)
14 Steam nozzle (brass)
15 Pressure/ quantity regulation at the
hand spray gun
16 Safety latch of the hand spray gun
17 Power supply
18 Folding compartment
(M/S only)
19 Connection for water supply with filter
20 Exit opening of the high-pressure hose
(MX/SX only)
21 Step depression
22 Pouring vent for detergent 2
23 Hand crank for hose drum
(MX/SX only)
24 Pouring vent for detergent 1
25 Hose drum
(MX/SX only)
26 Pouring vent for fuel
27 Handle
28 Operating field
29 Closing flap for storage compartment
30 Storage compartment for accessories
31 Nameplate
32 Cover lock
33 Oil tank
34 Pressure/quantity regulation of the
pump unit
35 Oil drain screw
36 Backflow valve of the detergent infeed
26
37 Detergent suction hose 1 with filter
38 Detergent suction hose 2 with filter
39 Fuel filter
40 Service switch
41 Water shortage safe guard with sieve
42 Float tank
43 Fine filter (water)
Operating field
Figure 2
A Power switch
B Temperature controller
C Dosage valve for detergent
D Manometer
1 Indicator lamp pump
2 Indicator lamp rotation direction
(not HDS 7/9, HDS 7/10, HDS 7/12)
3 "Ready for use" indicator lamp
4 Fuel indicator lamp
5 Indicator lamp: Detergent 1
(HDS 12/18 only)
6 Engine indicator lamp
7 Indicator lamp burner failure
8 Indicator lamp service
9 Indicator lamp system care
10 Indicator lamp: Detergent 2
(HDS 12/18 only)
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.

Symbols on the machine

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of electric shock!
Only electricians or authorised
technicians are permitted to
work on parts of the plant.
– 2
EN

Colour coding