Controls & Connections: Defiance V8 - Paradigm DEFIANCE Série Manuel Du Propriétaire

CONTROLS & CONNECTIONS:
Defiance V8
1
2
3
5
7
1. Level
The Level adjusts the subwoofers output level to match that of your
speakers.
2. Low Pass Filter
The level Low Pass Filter controls the subwoofers upper frequency cut-off.
This can be set to match the low-frequency roll-off of your front speakers.
Example: If your front speakers play to approximately 80Hz, you can set
the subwoofers Low Pass Filter frequency to 80Hz.
NOTE: The Low Pass Filter should be set to Bypass if a crossover has
been set in your Preamp/Receiver.
21
6
6
4
8
9