Paradigm DEFIANCE Série Manuel Du Propriétaire page 8

SAFETY WARNINGS AND
INSTALLATION IN BRIEF (cont'd)
Setting the Controls (Using LFE Input): Defiance V10 and V12
• Setting Control: Set the switch to 'Local'.
• Power Mode: Set the switch to 'Auto'.
• Level: Set at twelve o'clock (straight up).
• Use your receiver's bass management system to adjust subwoofer
integration.
Setting the Controls (Using LFE Input): Defiance V8
• Power Mode: Set the switch to 'auto'.
• Level: Set at twelve o'clock (straight up).
• Use the Low Pass Filter and set to Bypass.
Setting the Controls (Using Left/Right Inputs): Defiance V10 and V12
• Setting Control: Set the switch to 'App'.
• Power Mode: Set the switch to 'Auto'.
• Download the Paradigm Sub Control app (from Google Play or the
Apple App Store).
• Using the app, adjust the following settings:
– Volume (level): Set at -14dB or twelve o'clock (straight up).
– Phase: Start with 0°.
– Low Pass Filter: Set lower than the low-end frequency response
of your main speakers. If you are uncertain of your main speaker
low-frequency response, start with 80Hz.
Setting the Controls (Using Left/Right Inputs): Defiance V8
• Power Mode: Set the switch to 'auto'.
• Level: Set at twelve o'clock (straight up).
• Use the Low Pass Filter and set to 80Hz.
5