Connections (Pictorial) - Paradigm PDR Serie Mode D'emploi

BACK PANEL: CONTROLS AND CONNECTIONS
1
2
STATUS
4
6
10
1
Subwoofer Level
Balances the subwoofer output level to your speakers.
2 Subwoofer Cut-Off Frequency with Bypass Option
Controls the subwoofer's upper-frequency cut-off. This can be set to
match the low-frequency roll-off characteristics of your front speakers.
For example, if your front speakers play to approximately 80 Hz, you can
set the subwoofer cut-off frequency to approximately 80 Hz.
3
PAIR
5
9
STANDBY
7
8
PDR Series
PRODUCT CONSUMES LESS
THAN 1 WATT IN STANDBY.
Manufactured Under License.
U.S. Patent # 5,075,634 and
5,510,753 Patent Pending
CONTAINS FCC ID: WUO-WRX1010. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
3 Bypass option allows you to bypass the subwoofer's built-in cut-
off control to let your preamp/processor's or receiver's internal bass
management system provide the crossover function.
4 Status LED (wireless models only)
Indicates connection status between wireless subwoofer and
transmitter (e.g. Not Paired, Searching for Connection, Paired).
For additional information see text section 'Pairing Your Wireless
Subwoofer with the Transmitter.'
4