Switching On Scales / Measuring Weight, Required Calorie Intake And Body Fat, Water, Bone And Muscle Percentages; Auto Power Off - SilverCrest SPWD 180 B1 Mode D'emploi

SilverCrest SPWD 180 B1
Stand on the tread (5) of the diagnostic scales so that your weight is evenly distributed. Remain as
still as possible during the weighing process as the measurement result may be distorted otherwise.
The measurement result is indicated on the LCD display (1) during the weighing process. The
measurement is complete when the display flashes twice.
Switching on scales / measuring weight, required calorie intake
and body fat, water, bone and muscle percentages
You must first enter your personal data before performing these measurements. Please pay
particular attention to the section "Entering or changing personal data". Proceed as follows to
perform the measurement:

Press the SET button (3) to switch on the scales.

Press the ▲ button (2) or ▼ button (4) to select the desired user profile memory (22).

Stand barefoot on the tread (5) and make sure that you are standing on both electrodes (6).

The measurement then starts. Remain standing on both electrodes (6) until the measurement is
complete. Remain as still as possible during the weighing process as the measurement result
may be distorted otherwise.

After measuring successfully, the following values are displayed three times in succession:
o Body weight
o Body fat percentage (15) and obese (18), overweight (19), normal weight (20) or
underweight (21)
o Water percentage (16)
o Muscle percentage (25)
o Bone percentage (9)
o Recommended calorie intake per day (17)

Auto Power Off

The diagnostic scales have an automatic switch-off function (Auto Power Off function). After
displaying the measurement result, the diagnostic scales switch off automatically.
52 - English