Aux In - SilverCrest SIRD 14 C1 Manuel D'utilisation Et Informations Sur Les Services

Saving/recalling stations
Proceed as follows to save a station:

To save the current radio station, hold the FAVOURITE button [6] down for approx. 2 seconds
until the favourite list appears.

Use the NAVIGATE knob [3] to select which one of the 10 station presets you want.

Press the NAVIGATE knob [3] to save the radio station on the selected station preset. Please
note that any station presets used will be overwritten. Only the frequency is saved, not the
station name.

To recall a previously saved stations, briefly press the FAVOURITE button [6] and use the
NAVIGATE knob [3] to select the station from the list. Press the NAVIGATE knob [3] to play the
selected station.
If you press the MENU button [5], you can choose one of the following options as well as the
"System Settings" and "Main menu" options:
[Scan setting] This option lets you choose if the device searches for "strong" stations only or also
for "weak" stations. Rotate the NAVIGATE knob [3] to select and press the NAVIGATE knob [3] to
confirm. The selected setting is marked with a
[Audio setting] This lets you define that "weak" stations are to be received in Mono only. This
can help to reduce noise. Rotate the NAVIGATE knob [3] to select and press the NAVIGATE knob
[3] to confirm. The selected setting is marked with a

AUX in

Use this operating mode to play music from an external audio source on your Internet Radio.
Proceed as follows:

Connect one end of the jack-type audio cable [D] to the headphones jack of your external
audio source.

Next, connect the other end of the jack-type audio cable [D] to the AUX IN jack [17] of your
Internet Radio.

Start playing on the external audio source.

If necessary, you can set the desired volume with the VOLUME knob [9] and on your external
audio source.
If you press the MENU button [5], the "System settings" and "Main menu" options are available.
.
.
SilverCrest SIRD 14 C1
English - 191