Alarm; Selecting Radio / Aux Mode - SilverCrest SKR 800 D1 Mode D'emploi Et Consignes De Sécurité

SilverCrest SKR 800 D1

8.14 Alarm

You can set two alarm times. For both alarm times, you can select a buzzer or the last radio station you
listened to. For Alarm 1 use the
that the clock is displaying the correct time.
 While switched off, press and hold the
(Alarm 2) for approx. 2 seconds.
 The hour display flashes and you can now turn the TIMER button [5] to set the hour for the alarm.
Briefly press the / MEM button [13] or the
 The minute display flashes and you can now turn the TIMER button [5] to set the minutes for the alarm.
Briefly press the / MEM button [13] or the
 The indicator for the option selected flashes on the display [1]. Now you can turn the TIMER button
[5] to select the following options:
Option
OFF
 Briefly press the
/ MEM button [13] or the
If the alarm is enabled, there is a
The alarm buzzer starts quietly and gradually increases in volume. To disable the alarm
for 24 hours, briefly press the VOLUME button [14], or press the
or the / AMS button [10].
If you do not switch the buzzer off, it will switch off automatically after about 1 hour.
To snooze the alarm for about 9 minutes, briefly press the SNOOZE/SLEEP button [12].
While the SNOOZE function is active, depending on the set alarm, the
[34] or

8.15 Selecting Radio / AUX mode

When the device is powered on, keep the VOLUME knob [14] pressed for about 2 seconds to toggle
between Radio and AUX mode.
In Radio mode, the FM indicator [31] and the frequency [30] in MHz [29] are shown on the
display [1].
In AUX mode, the AUX indicator [30] is shown on the display [1].
When it is switched off, it switches back on to the last operating mode active
(Radio/AUX).
38 - English
All manuals and user guides at all-guides.com
/ MEM button [13] and for Alarm 2 the
/ MEM button [13] (Alarm 1) or the
Function
Disables the alarm
Enables the alarm with buzzer (alarm time 1)
Enables the alarm with buzzer (alarm time 2)
Enables the alarm with the last tuned-in radio station (alarm time 1)
Enables the alarm with the last tuned-in radio station (alarm time 2)
/ symbol [34] or
/ symbol [35] flashes on the display [1].
/ AMS button [10] to apply the setting.
/ AMS button [10] to apply the setting.
/ AMS button [10] to apply the setting.
symbol [35] on the display [1].
/
/ AMS button [10]. Check
/ AMS button [10]
/ MEM button [13]
/ symbol