Sony DSR-11 Mode D'emploi page 48

Operating the Menus
Submenu
Icon/Menu
(page)
CM SET ERASE ALL
CM
48
(GB) Chapter 3 Adjusting and Setting Through Menus
Setting
Erases all items in the cassette memory.
If you select this item, one of the following symbols appears. If no cassette is loaded,
nothing is displayed.
: Tape with cassette memory
: Tape without cassette memory
Erase all items in the cassette memory as follows:
1 To erase all items, select OK, otherwise select RETURN. (If you select OK, the unit will
check again to see if you really want to erase all items.)
CM SET
CM SEARCH
VTR
T I TLE D I SP
A
DISP LABEL D I SP
TAPE LABEL
CM
,
I TEM ERASE
ETC
ERASE ALL RETURN
RETURN OK
[MENU] : END
2 To erase all items, select EXECUTE, otherwise select RETURN. (If you select
EXECUTE, the ERASING message will flash, and the unit starts erasing all items in the
cassette memory. While the ERASING message is flashing, you cannot use the M/m or
SET buttons. After all items have been erased, the COMPLETE message appears.
Press the M/m button to erase the COMPLETE message.)
CM SET
CM SEARCH
VTR
A T I TLE D I SP
LABEL D I SP
DISP
TAPE LABEL
CM
,
I TEM ERASE
ETC
ERASE ALL ERASING
RETURN
[MENU] : END
Note
You cannot erase all items in the cassette memory in the following cases:
• The unit does not have a tape inserted or the tape is being unloaded.
• The tape does not have cassette memory.
• The tape is write-protected.
• The tape is being recorded.
• The cassette memory is being used.
CM SET
CM SEARCH
VTR
T I TLE D I SP
A
LABEL D I SP
DISP
CM TAPE LABEL
,
I TEM ERASE
ETC
ERASE ALL RETURN
RETURN OK
[MENU] : END
CM SET
CM SEARCH
VTR
T I TLE D I SP
A
LABEL D I SP
DISP
TAPE LABEL
CM
ETC I TEM ERASE
ERASE ALL COMPLETE
RETURN
[MENU] : END
CM SET
CM SEARCH
VTR
T I TLE D I SP
A
LABEL D I SP
DISP
CM TAPE LABEL
I TEM ERASE
ETC
ERASE ALL RETURN
RETURN EXECUTE
[MENU] : END