Playback; Connections For Playback - Sony DSR-11 Mode D'emploi

Playback

Playback

Connections for Playback

To equipment with a DV jack
20
(GB) Chapter 2 Playback and Recording
This section describes the necessary connections, settings, and operations
to perform playback on this unit. The same settings and operations apply
whether you are using the unit for dubbing or as a stand-alone
videocassette player.
Connecting to a computer
The video and audio signals are sent to a computer with virtually no
deterioration in quality, enabling high-quality uploading. The signal flow
is automatically detected so you do not need to make separate connections
for input and output.
Recorder
Computer
to the
DV jack
i.LINK cable (DV cable) (not supplied)
Notes
•Set DV EE OUT on the VTR SET menu to OFF.
For details on the VTR SET menu, see "VTR SET menu" on page 43 (GB).
• With the DV connection, data codes (recording date/time, camera data)
recorded on the source tape are transmitted from this unit (player).
Player
Monitor
DSR-11
l: Signal flow