Ayce RMB46 SHW BS500E 2.6 PS Mode D'emploi D'origine page 98

Damaged blades
If, in spite of all caution, the blade comes into contact with an obstacle, switch off
the engine immediately and pull off the spark plug connector.
Tilt the lawn mower to the rear and check the blade for damage. Damaged or bent
blades must be replaced. Never straighten a bent blade. Never work with bent or
heavily worn blades as this will result in vibrations, causing further damage to the
mower.
Warning! Risk of injury when working with a damaged blade.
7.2.3 Axles and wheel hubs
Grease should be applied to the axles and wheel hubs once per season.
To do so, remove the wheel caps with a screwdriver and loosen the fastening
screws on the wheels.
7.2.4 Care and adjustment of the actuator cables
Oil the actuator cables at regular intervals and check that they move easily.
7.2.5 Inspecting the V-belt
Remove the blade as described in 7.2.2.
To inspect the V-belt you must remove the V-belt cover (Fig. 8/Item 5b).
8
7
5b