Ayce RMB46 SHW BS500E 2.6 PS Mode D'emploi D'origine page 93

GB
92 I 93
To use the mulching function, disconnect the debris bag, slide the mulching adap-
tor into the ejector opening (Item 4b) and close the ejector opening.
To remove the mulching adapter, press the lever (A) as shown in Figure 4b.
6. OPERATION
Note!
The engine comes without oil and petrol. Therefore, be sure to add oil and petrol
before starting the engine.
The enclosed engine manual from Briggs & Stratton provides maintenance in-
formation and maintenance interval information on the engine.
Warning: Never use more than one safety petrol can. Do not smoke when refue-
ling. Switch off the engine before refueling and allow the engine to cool down for a
few minutes.
Ensure that the ignition cable is connected to the spark plug.
Carrying out a safety test on the engine start/stop lever
The lawn mower comes equipped with an engine start/stop lever (Fig. 5a/Item 1)
in order to prevent it from starting up unintentionally and to ensure that the engi-
ne and blade stop quickly in case of danger. The lever must be actuated (Fig. 5b)
before the lawn mower is started. When the engine start/stop lever is released, it
must return to its initial position (Fig. 5a).
5a 5b
1
2 2
1