Ayce RMB46 SHW BS500E 2.6 PS Mode D'emploi D'origine page 100

The enclosed engine manual from Briggs & Stratton provides maintenance in-
formation and maintenance interval information on the engine.
4. Remove the spark plug connector from the spark plug.
5. Clean the cooling fins of the cylinder and the housing.
6. Unhook the starter cable from the hook (Fig. 3c). Slacken the connection
shown in Fig. 3b on the left and right of the push bar and swing down the upper
push bar. Make sure that the actuator cables do not get kinked when the bar is
pulled up.
3b
11 9b
12b 12b
7. Wedge a few layers of corrugated cardboard between the upper and lower
push bars and the engine in order to prevent any chafing.
8. Secure the load sufficiently so that it cannot slip and cause damage or injuries
during transportation.
7.5 Consumables, wear materials and spare parts
Spare parts, consumables and wear materials such as engine oil, V-belts, spark
plugs, air filter inserts, petrol filters, batteries and blades are not covered by the
warranty.
3c
11
9a
11
9b