General Safety Instructions - Siei QUIXDrive F Manuel D'instruction

SAFETY INSTRUCTIONS

General safety instructions

Throughout the text, the following Danger symbols indicate paragraphs containing particular instructions that must be
carefully read so as to assure safety conditions to users:
This warns the user about the presence of a dangerous voltage. It indicates the presence of High
Voltage conditions that can cause serious damages or even death.
This indicates a general danger or very important operation notes.
Warnings
• • • • •
Electrical devices can represent a risk source for personnel safety. It is therefore necessary to know all usage
methods and unit control devices perfectly before using the machine.
• • • • •
The machine should then be used by skilled personnel only, aware of the installation and operation rules, in
compliance with the safety and protection standards, and able to interpret all danger warnings.
The capacitors contained in the machine have dangerous high voltages. After cutting power off, you should wait
at least 5 minutes before performing any operation.
With stopped motor, dangerous voltages can be present on the entire power terminal board:
terminals L1, L2, L3, U, V, W.
• • • • •
In particular adjustment programming conditions, after a power failure, the machine could start automatically.
Notes on Responsibilities
The unit is designed for motor speed control only. Do not use it for other applications.
The manufacturer is not responsible for damages deriving from improper use or installation or inadeguate ambient
conditions, as well as for damages due to improper rated values.
Nor will, the manufacturer be responsible for consequential or accidental damages.
No intervention has to be perfomed on parts inside the machine: when installing, just remove the terminal board cover panel.
Any tampering or use of spare parts or other parts not supplied by the manufacturer, besides making the warranty void,
may cause damages and/or serious accidents.
The technical data contained in this manual are to be considered correct at printout time. The manufacturer, however,
reserves the right to change, without notice, both the contents and the technical data of the product.
2-GB
—————— SIEI ——————