Inverter 3026 CE Mode D'emploi page 70

The following is a trouble-shooting table with problems and their probable causes.
Take the necessary measures suggested as soon as possible. See your local
distributor if necessary.
11. TROUBLE SHOOTING AND REFERENCE TABLE
Phenomena
Causes
The plug is not properly in place.
Power failure.
Auto shut-off device has been
triggered.
The tank is empty.
Fuel feeder cap is loose.
Fuel
Water and/or dust in fuel.
Fuel tank is not fitted properly.
Fuel filter is not fitted.
Fuel system connections are loose.
Air filter is clogged.
Overheat Warm air outlet is
prevention blocked.
device has
been Air intake is
triggered blocked.
Anti-room temp. overheating device
is triggered.
Child lock is set.




   
  
 
 
 
    
 
 


59
Make sure plug fits properly in power
outlet.
Wait until power comes back.
Reignite unit, change unit location to a
better place.
Fill the fuel tank.
OIL
Fasten the cap tightly.

E0
Change to clean fuel.
E2

E3
E4
E0
Remove water and clean filter.
E2

E3
E4
OIL
Refit fuel tank properly into fixed tank.
OIL
Fit it properly into fixed tank.
OIL
See your local distributor.
 
E0
Clean air filter.
E2
E4
Remove the obstruction.
EH
Clean air intake area.
EH
Open the window, and ventilate the room.
EH
Release child lock
E9
Solutions