Child Lock (Safety Lock For Children); How To Use The Timer - Inverter 3026 CE Mode D'emploi

8) Child lock (safety lock for children).

Press CHILD LOCK button 3 times.
* Press CHILD LOCK button 3 times within 3 seconds when the unit is off.
* The Child lock is set and the digital display shows "CL".
* To cancel CHILD LOCK , press CHILD LOCK button 3 times again.
* The unit can not be operated if CHILD LOCK is set.
If ON/OFF button is pressed, the alarm sounds and "CL" in the display blinks,
indicating that CHILD LOCK is set.
* It is not possible to select both 5-seconds ignition and CHILD LOCK at the
same time .
What is CHILD LOCK ?
A function to prevent mis-use by young children.
9) Set Timer for delayed start ?
How to set the TIMER ?
Set the TIMER when the heater is turned off.
* Press MODE button and select Timer setting mode.
* Set Timer in the same manner as setting Time.
* Timer time is stored on input.
* Timer is originally set at 6:00 am.
* If no setting action is made for 5 seconds, during Timer setting, the LCD automati-
cally reverts to CLOCK Mode.
HOW TO OPERATE TIMER?
* Press the Timer button when the unit is on
* The Timer lamp lights and the digital display changes to clock mode.
* The unit automatically switches on at the selected time.
* Press On/Off button to cancel Timer mode.
* When the room temperature is relatively low, the unit switches on between 5
and 15 minutes earlier than the selected time.
WARNING : Please ensure adequate ventilation
WARNING : Do not set the Timer to switch the unit on when the house is
* To confirm Timer set time, press mode button and select Timer mode.
* If the Timer is not set, or the power plug is not switched on, or there is a power
failure, the Timer will not work.
In such cases, re-set present time and Timer once more.
53
unoccupied.