Trouble Shooting And Reference Table - Inverter 3026 CE Mode D'emploi

THE FOLLOWING IS A TROUBLE-SHOOTING TABLE WITH PROBLEMS AND
THEIR PROBABLE CAUSES. TAKE THE NECESSARY MEASURES SUGGESTED
AS SOON AS POSSIBLE. SEE YOUR LOCAL DISTRIBUTOR IF NECESSARY.

11. TROUBLE SHOOTING AND REFERENCE TABLE

PHENOMENA
CAUSES
THE PLUG IS NOT PROPERLY IN PLACE.
POWER FAILURE.
AUTO SHUT-OFF DEVICE
TRIGGERED.
THE TANK IS EMPTY.
FUEL FEEDER CAP IS LOOSE.
FUEL
WATER AND/OR DUST IN FUEL.
FUEL TANK IS NOT FITTED PROPERLY.
FUEL FILTER IS NOT FITTED.
FUEL SYSTEM CONNECTIONS ARE LOOSE.
AIR FILTER IS CLOGGED.
OVERHEAT WARM AIR OUTLET IS
PREVENTION BLOCKED.
DEVICE HAS
BEEN TRIGGERED AIR INTAKE IS BLOCKED.
ANTI-ROOM TEMP. OVERHEATING DEVICE IS
TRIGGERED.
CHILD LOCK IS SET.
X
X
HAS BEEN
X
X X X
X X
X
X
X
X X X
X
X
X
X
OIL
X
E0
E2
X X
E3
E4
E0
E2
X X E3
E4
OIL
X OIL
X OIL
X X X
E0
X X E2
E4
X EH
X EH
X EH
CL
59
SOLUTIONS
MAKE SURE PLUG FITS PROPERLY IN POWER
OUTLET.
WAIT UNTIL POWER COMES BACK. CHECK THE
FUSE OF POWER PLUG.
REIGNITE UNIT, CHANGE UNIT LOCATION TO A
BETTER PLACE.
FILL THE FUEL TANK.
FASTEN THE CAP TIGHTLY.
CHANGE TO CLEAN FUEL.
REMOVE WATER AND CLEAN FILTER.
REFIT FUEL TANK PROPERLY INTO FIXED TANK.
FIT IT PROPERLY INTO FIXED TANK.
SEE YOUR LOCAL DISTRIBUTOR.
CLEAN AIR FILTER.
REMOVE THE OBSTRUCTION.
CLEAN AIR INTAKE AREA.
OPEN THE WINDOW, AND VENTILATE THE ROOM.
RELEASE CHILD LOCK