Max SuperFramer SN883RH2 Manuel D'utilisation Et D'entretien page 16

DRIVING DEPTH ADJUSTMENT
Deeper Shallower
WARNING
ALWAYS disconnect air supply before making
adjustment.
The driving depth adjustment is made by adjust-
ing the Adjustment Dial.
1 With air pressure set, drive a few nails into a
representative material sample to determine
if adjustment is necessary.
2 If adjustment is required, disconnect air sup-
ply.
3 Refer to the mark on the Contact Arm area
for direction to turn the Adjustment Dial.
4 Re-connect air supply.
Adjustment Dial
TRIGGER LOCK MECHANISM
The tool is equipped with a Trigger Lock Mecha-
nism. Push and rotate the Trigger from LOCK to
the Trigger UNLOCK position before driving
nails.
Trigger Lock Dial
REMOVING JAMMED NAILS
WARNING
ALWAYS disconnect air supply before remov-
ing jammed nails.
16
Trigger