STEINEL XLED home slim S Mode D'emploi page 53

Note: after the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting move-
ment again. The LED floodlight can then switch ON again
in response to movement.
The shortest time setting is recommended when adjusting
the detection zone and performing the
functional test.
Adjusting the detection zone
To rule out inadvertent triggering or to target specific areas,
the detection zone can be limited or adjusted with the film
shroud. The film shroud is stuck onto the sensor unit.
6.2
• Once cut to size, stick the film shroud onto the sensor
unit.
– 22 –
Index