Symbols And Icons; Symbols On The Device - Grizzly ERM 1851 A Q-360 Traduction De La Notice D'utilisation Originale

GB
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.073 Ohms. The user must ensure that
the device is operated only on a power
supply network that fulfi ls this require-
ment. If necessary, the local power supply
company can be asked for the system
impedance.
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specifi ed in the dec-
laration of conformity.
Technical and visual modifi cations may
be made without notice in the course
of further development. All dimensions,
information and specifi cations in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
operating instructions.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may diff er during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
70
is turned off and times when the
tool is turned on but is running
idle).

Symbols and icons

Symbols on the device

Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protec-
tion.
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
Risk of injury from parts
being thrown up.
Keep nearby people away
from the mower.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work
or if the power cable is
caught or damaged.
Danger of damaged power
cable.
Keep the power cable
away from the cutting
blade!
Caution! The lawnmower
blade continues to run after
switching off .