Metal Grease Filter; Cleaning In The Dishwasher; Cleaning By Hand - Gurari GCH B 117 PRIME Manuel D'installation Et D'utilisation

Metal grease filter

The aforementioned grease filters are in front of the engine and ensure the absorption of greasy
ingredients from the kitchen haze. The cleaning can be done in the dishwasher. It is recommended to
do this all 14 days (at least once a month). Too long cleaning intervals lead to a blockage of the filter
and thus reduced power.

Cleaning in the dishwasher

The grease filters of your hood are dishwasher safe (55 ° C). However, light discoloration of the metal
can arise. These have no influence on the function of the grease filter and are not considered a
reason for complaint. Put the filters loosely in the dishwasher. Do not bend or pinch them. NOTE: Do
not clean very dirty grease filters together with other dishes.

Cleaning by hand

If cleaned manually, first soak the grease filter extensively
in hot rinse liquor, then brush well and above all, rinse
well with clean water. After that drain well. Avoid use of
aggressive, acidic or alkaline detergent. For very stubborn
dirt you can resort to commercially available degreaser
sprays.
Usage
Lighting Power levels
The control takes place via a 3-stage sensor control on the front panel of the extractor hood.
1, 2 and 3 turn on the engine at the appropriate power level. Touch again the lighted power level
switches the motor off again.
The field on the far left switches the LED lighting on and off again.
Timer / off timer
The extractor hood has a switchable automatic off timer (5 min). To activate this, keep the desired
power level pressed for 5 seconds. After that the timer activates automatically and turns off the
engine and lights after 5 minutes.