Metal Grease Filter - Gurari GCH I 331 PRIME Manuel D'installation

1. examination
Before starting the actual installation, the device should be checked. In addition to the control of
externally recognizable damage, a function check has to be done. Take out the device from the
packing, get rid of all packing materials and put the device with the back on the floor / table. After
connecting to a power supply, the lighting as well as the function of each stage should be checked.
Please take care that exhaust outlet is open through check.
2. Installation of the hood
Pass the metal ropes through the holes of the fixing covers and mounting brackets (diagram 1).
Strain the clamps on the metal ropes and make a knot (diagram 2, 3, 4,5).
Tighten the clamps on the metal ropes as far as they will go (diagram 6).
Drill 6 holes in the ceiling for M Ø12x60mm anchors..
Raise the mounting brackets to the ceiling. Tighten the wedge anchors (diagram 7,8).
Lift the bracket cover to the joint with the mounting brackets. Secure the bracket cover with 4 M4x12
screws (diagram 9)
Check the reliability of an extracts mounting.
This completes the assembly.
Usage
Inserting and changing the carbon filter
For recirculation mode we recommend the use of a carbon filter,
which frees the cooking fumes from the smell. The carbon filter
consists of two charcoal-filled cassettes, mounted left and right to
the suction opening of the engine. For mounting please check
picture.
To mount the carbon filter, please take the following steps:
1. First remove the metal grease filters
2. Place the charcoal filter on both sides of the motor in front of the
suction openings
3. In the middle of the filter is a receptacle and on the fan a suitable insert
4. If the filter is seated correctly, you can fix it with a small twisting motion
5. Then reinsert the grease filter
The matching carbon filter for this model is called GE15

Metal grease filter

The aforementioned grease filters are in front of the engine and ensure the absorption of greasy
ingredients from the kitchen haze. The cleaning can be done in the dishwasher. It is recommended to
do this all 14 days (at least once a month). Too long cleaning intervals lead to a blockage of the filter