Hot Surface Indicator; Boiling Sensor; Pause - Smeg SIMU524 Notice D'utilisation

To Use:
1. Touch POWER.
The indicator light above the Power keypad and a dash ("-")
in each surface cooking area will light to indicate that each
surface cooking area is ready to be activated.
Inactivity for 1 minute after the main power has been turned
on will automatically turn off the power to the cooktop.
If a cooking function or the power slider is touched without
first selecting a surface cooking area, all dashes (one for
each zone) will flash and an invalid tone will sound 3 times.
To Turn On a Surface Cooking Area:
1. Touch directly on the display area for the surface cooking
area you want to use.
The current power level and indicator light will flash for
10 seconds and then remain on.
Touching any other feature or the power slider stops the
flashing and information for the keypad that was touched
will be displayed.
When a surface cooking area is selected, the timer will
also turn on to show that it can now be set.
When a surface cooking area is left at the "0" power level for
1 minute, the surface cooking area will automatically turn off
and display only the middle dash without the indicator light.
2. Select a heat setting from 1 to 9 by touching/sliding on
the power slider. The heat setting will appear in the surface
cooking area display.
The power slider consists of 9 positions plus a "Boost"
position. When the user slides to "-", "0" will be displayed.
The surface cooking area will not turn on but remains
active/selected.
When a surface cooking area is left at the "0" power level for
1 minute, the zone will automatically turn off and display only
the middle dash without the indicator light.
Use the following chart as a guide when setting heat levels.
Setting Recommended Use
9-Boost
Bring liquid to a boil
■
9 Start food cooking
■
7-8
Quickly brown or sear food
■
6-7 Hold a rapid boil
■
5-6 Fry or saute foods
■
Cook soups, sauces and gravies
■
4-5
Maintain a slow boil
■
Stew or steam food
■
3-5 Range of simmer levels for
■
simmering with or without a lid
Melt
Melt chocolate or butter
■
Simmer Simmer sauces
■
3. Touch POWER to turn off the cooktop when finished.
6

Hot Surface Indicator:

An "H" will appear in the heat setting display of a surface
cooking area that is too hot to touch, even after that surface
cooking area is turned off.
A. Heat setting display
B. Hot surface indicator "H"
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
This function allows you to temporarily hold a cooking
process, and then resume the cooking process, returning
to the previous settings.
NOTE: The Boiling Sensor function and any Timer settings
will not resume after using the Pause function.
To Use:
1. Touch PAUSE.
2. "I I" blinks on the display in place of the power levels.
3. Touch PAUSE again to turn off Pause and resume cooking.
A. Pause function display

Boiling Sensor

This function automatically selects the ideal power setting
for bringing water to a boil and signals when the boiling
point is reached.
To Use:
1. After positioning the pot of water, touch POWER and
select the desired surface cooking area.
2. Touch BOILING. "A" appears on the display, and the
indicator light turns on.
3. During heating, an animation is displayed in the space
next to the surface cooking area display.
4. When the water comes to a full boil, the first of 3 signal
tones will sound.
5. After the second signal tone sounds, a timer is
automatically activated to keep track of the boiling time.
A B

Pause

A