Use With An External Dmx Controller - MC Crypt Magic Ball Notice D'emploi

Setting the Operating Mode

Use with an External DMX Controller

Each DMX device in a DMX chain requires a so-called DMX start address to be clearly identified by the controller.
This DMX start address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX start address).
The effect light requires 6 free DMX channels.
Setting the DMX start address
• Press the MENU button until the display shows "Axxx". In this case, "xxx" means the DMX address.
• Use the buttons UP or DOWN to select the desired DMX starting address ("A001" to "A512").
• Press the ENTER button to save your changes.
The following table provides information about the effects of the settings on the individual DMX channels:
DMX channel Value
1 000-003
004-255
2 000-002
003-255
3 000-002
003-255
4 000-002
003-255
5 000-003
004-127
128-255
6 000-006
007-250
251-255
26
Function
no function
strobe with adjustable frequency high > low
red light off
dimmer red 0-100%
green light off
dimmer green 0-100%
blue light off
dimmer blue 0-100%
no motor movement
motor rotation clockwise slow > fast
motor rotation counter-clockwise fast > slow
control via DMX channels 1-5 active
automatic function, programme change fast > slow
automatic function with music control