Maintenance; Inspection And Cleaning; Topping Up The Coolant - ESAB ESABMig 400t Manuel D'instructions

GB
7

MAINTENANCE

Regular maintenance is important for safe, reliable operation.
Maintenance must be executed by a professional.
Only those persons who have appropriate electrical knowledge (authorised
personnel) may remove the safety plates.
Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
7.1

Inspection and cleaning

Check regularly that the power source is free from dirt.
The power source should be regularly blown clean using dry compressed air at
reduced pressure. More frequently in dirty environments.
Otherwise the air inlet/outlet may become blocked and cause overheating. To avoid
this you can use an airfilter.
The airfilter is an accessory. Ordering number on page 47.
7.2

Topping up the coolant

We recommend a 50/50 % mixture of water and ethylene glycol.
ba36d2ea
– 13 –