Making Raw Nut Miilks - Tribest SB-130 Mode D'emploi

OPeRaTIng InsTRuCTIOns
C. MaKIng RaW nuT MILKs
1. Soak nuts: Use the measuring cup and take a full cup of dry nuts. Rinse thoroughly
and leave to soak overnight or for at least 4 hours.
• TIP: When soaking the nuts, put them directly into the milk screen and place the
screen into the utility cup. Pour water into the utility cup to soak the nuts and let it sit.
• TIP: Soyabella will work fine even if you do not soak the nuts. However, we always
recommend soaking nuts and beans before making milks in order to maximize
health benefits.
2. Add water to stainless steel chamber: Fill the stainless-steel chamber with water so
that the water level is between the upper and lower water-level lines.
3. Load nuts and attach the milk screen to the head unit: Load nuts into the Milk Screen.
You may add a little bit more soaked nuts if you want thicker milk. Attach the Milk Screen
to the head unit by moving the blade in a side-to-side motion to allow the screen to slide
properly into place. Lock the Milk Screen into place by turning it counter-clockwise.
• CAUTION: BE SURE THE MILK SCREEN IS PROPERLY LOCKED IN PLACE! If the Milk Screen
becomes loose during operation, the spinning blade could damage the Milk Screen!
4. Assemble machine and run MILL function: Connect the head unit to the stainless steel
chamber. Make sure the upper plug slides into the upper plug receptacle on top of the
handle. Plug the power cord into the power cord receptacle, and connect the other end to
a wall socket. Soyabella will beep and a red light will flash. Press the "MILL" button on the
head unit, the red light will turn solid, and Soyabella will run through a 10 second grinding
cycle. After about 3 seconds, the red light will flash. Repeat this procedure 3-5 times
depending on how thick you want the milk.
5. Pour milk and enjoy: Unplug the base unit. Lift the head unit with the screen from the
stainless steel chamber. Make sure that all the milk drains from the screen before moving
the head unit away from the stainless steel chamber. Place the head unit with the screen
still attached into the utility cup. Carefully pour milk from the stainless steel chamber.
• TIP: Add your favorite ingredients to flavor your favorite nut milk. Add a pinch of sea
salt, or try agave nectar, evaporated cane juice, vanilla, or any other flavors you like.
• Note: To avoid any build-up that may block the holes of the milk screen, clean the milk
screen as soon as possible. See page 12 for cleaning instructions.
10