Removing The Rechargeable Shaver Battery - Philips S99 Série Mode D'emploi

ENGLISH
34
Environment
- Do not throw away the shaver and the
SmartClean system with the normal household
waste at the end of their life, but hand them in at
an official collection point for recycling. By doing
this, you help to preserve the environment.
- The built-in rechargeable shaver battery contains
substances that may pollute the environment.
Always remove the battery before you discard or
hand in the shaver at an official collection point.
Dispose of the battery at an official collection
point for batteries. If you have trouble removing
the battery, you can also take the shaver to a
Philips service centre. The staff of this centre will
remove the battery for you and will dispose of it
in an environmentally safe way.

Removing the rechargeable shaver battery

Only remove the rechargeable battery when
you discard the shaver. Make sure the battery is
completely empty when you remove it.
Be careful, the battery strips are sharp.
1 Insert the screwdriver into the slot between
the front and back panel in the bottom of the
appliance. Remove the back panel.
2 Remove the front panel.
3 Unscrew the two screws at the top of the
inner panel and remove the inner panel.
4 Remove the rechargeable battery with a
screwdriver.