Charging With The Adapter; Charging In The Smartclean System - Philips S99 Série Mode D'emploi

Charging with the adapter

1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance (1) and
put the adapter in the wall socket (2).

Charging in the SmartClean system

1 Put the small plug in the SmartClean system.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
4 Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the top
cap to connect the shaver ('click') (3).
Note: The battery symbol lights up to indicate the
appliance is charging.
ENGLISH
19