Specifications; Type Labels - Dentsply Sirona MIDWEST AUTOMATE Mode D'emploi

10 Specifications

10 Specifications
Dimensions:
Weight:
Electrical rating:
Protection Class:
Protection:
Installation category:
Pollution degree:
Ambient operating temperature:
Noise levels:
Humidity:
Max. Altitude:
Operating location:
Onsite pressure:
Recommended operating pressure:
Air consumption during operation:
Compressed air quality:
Power fuses:
Storage and transport conditions
Ambient temperature:
Relative humidity:
Atmospheric pressure:

Type labels

The explanations of the symbols are described in chapter 1 "Important Information".
Length:
Width:
Height:
Rated voltage:
Rated frequency:
Rated power:
Residual oil content:
Residual dust:
Residual water:
Rated current:
Rated voltage:
Tripping characteristic:
Interrupting rating:
16
11.4 inches (289 mm)
9.1 inches (232 mm)
16.3 inches (414 mm)
9.6 kg (23.7 lbs)
100 – 230 V 10%
max. 30 VA
5 – 40°C (41 – 104°F)
60 (65) dB(A)
4 – 7 bar (58 – 100 psi)
4 – 4.5 bar (58 – 65 psi)
max. 0.1 mg/m³
max. 1 µm; max. 1 mg/m³
max. 0.1 g/m³ at -40°C (-40°F)
-30 – 70°C (-22 – 158°F)
Transport:
0 – 40°C (32 – 104° F)
Storage:
700 – 1,060 hPa
®
M A
IDWEST UTOMATE
Automated Handpiece Maintenance System
EN
50 / 60 Hz
I
covered
Cat. II
P 2
max. 85%
2,000 m
Indoor only
40 Nl/min
2 A
250 V
Large (T)
H
5 – 95%
®