7.6.7
DSP & Operating system Error
Communications errors or disconnection between the DSP and the Linux operating system could corrupt parameter
settings, which could in turn damage the speaker system in use. Therefore, the user should reboot the amplified
controller by switching it off and on to try to restore the communication between the DSP and the operating system.
7.7
L-DRIVE: transducer protection system
The new L-DRIVE protection provides a dual analysis of both signal intensity and voltage in real time and RMS. Under
extreme conditions, when component membranes reach the over-excursion zone or if the coil ensemble temperature
reaches a critical point, L-DRIVE is activated and acts as a power regulator.
As a result, the amount of power delivered to each channel is adjusted to the power handling capacity of each individual
transducer on the relevant channel. Thereby, this optimizes the power resources of the system in use while preserving
the highest available dynamic range.
LA8_UM_ML_1.2
w w w . l - a c o u s t i c s . c o m
EN
37 en