Store Preset (User Memories 1 To 10) - L-Acoustics LA8 Manuel Utilisateur

LA8
AMPLIFIED CONTROLLER
User Manual
VERSION 1.2
* If the controller is assigned to a group (see section 7.3.6) the sequence is continued as follows:
*
CLEAR GRP PARAM ?
OK
ESC
7.3.3

STORE PRESET (User memories 1 to 10)

The STORE PRESET menu is for storing a preset (including the user parameters) in the 10 available user memory
locations.
To store a preset, select the STORE PRESET menu and follow this procedure (see also Figure 17):
1. Turn the encoder wheel to scroll through the 10 available user memory locations.
2. Press the OK key or the encoder wheel to select the desired memory location (or press the ESC key to cancel
and return to the last menu). The LCD will display "OVERWRITE ?"
3. Press the OK key or the encoder wheel once again to overwrite (or press the ESC key to cancel and return to
the last menu): the LCD will display "FILE NAME ?"
4. Name the new file (12 characters max): scroll through the characters by turning the encoder wheel, go to the
next character by pressing the encoder wheel, finally confirm by pressing the OK key (or abort by pressing the
ESC key).
The preset will be loaded and activated and the LCD screen will display the preset information as described in
section 7.2.
Store User Preset
1: empty
Store User Preset
10: empty
Note: Changing the name of a preset does not reset its basic characteristics, in particular the L-ACOUSTICS
locked parameters.
LA8_UM_EN_1.2
Outputs muted
OVERWRITE ?
OK
1: empty
ESC
OK
FILE NAME ?
1: SB28_60
Figure 17: Storing a preset
w w w . l - a c o u s t i c s . c o m
40:SB28_60
OK
SB_A SB_A SB_B SB_B
40:SB28_60
ESC
SB_A SB_A SB_B SB_B
ESC
+PUSH
ESC
Group parameters
110
canceled
and outputs muted
Group
110
parameters still
available
FILE NAME ?
1: My SB28_60
ESC
OK
1: My SB28_60 110
SB_A SB_A SB_B SB_B
®
factory
26 en