Speakon ® And Ca-Com ® Output Connectors - L-Acoustics LA8 Manuel Utilisateur

6.6.2 Speakon ® and CA-COM
Two NL4FC Speakon ® and one 8-pin CA-COM
loudspeaker connection.
®
The Speakon connectors are wired as follows:
Left: Pin 1+
Pin 1-
Pin 2+
Pin 2-
The CA-COM ® connector is wired as follows:
Pin A
Pin B
Pin C
Pin D
!
Before connecting a loudspeaker system please refer to the specified speaker manual for further
instructions.
IMPORTANT
!
To insure both high performance and safety L-ACOUSTICS
high-quality, fully insulated speaker cables made of stranded copper wire.
In order to preserve a high damping factor it is desirable to keep loudspeaker cables as short as
possible and with a gauge offering low resistance per unit length.
IMPORTANT
LA8_UM_ML_1.2
® output connectors
® connectors located at the back of the LA8 controller are for
Out 1+
Out 1-
Out 2 +
Out 2 -
Out 1+
Out 1-
Out 2 +
Out 2 -
Figure 10: Output speakers connections (signal path)
w w w . l - a c o u s t i c s . c o m
Right: Pin 1+
Pin 1-
Pin 2+
Pin 2-
Pin E
Pin F
Pin G
Pin H
® recommends the exclusive use of
Out 3 +
Out 3 -
Out 4 +
Out 4 -
Out 3 +
Out 3 -
Out 4 +
Out 4 -
19 en
EN