User Interface Menu; Introduction - L-Acoustics LA8 Manuel Utilisateur

LA8
AMPLIFIED CONTROLLER
User Manual
VERSION 1.2
7.3

User interface menu

7.3.1

Introduction

The user interface gives access to 6 menus that are briefly described in the following list. Please refer to sections 7.3.2
through 7.3.7 for detailed instructions.
LOAD PRESET
STORE PRESET
DELETE PRESET
PRESET PARAMETER
CLEAR GRP PARAMETER
OPTIONS
The following procedure and Figure 15 show how to access one of these menus:
1. Press and release the encoder wheel.
2. Rotate the encoder wheel clockwise or counterclockwise until the desired menu is selected.
3. Press the OK key or the encoder wheel to enter menu or press the ESC key to return to the Main screen.
LA8_UM_EN_1.2
Menu Function
Load and initiate a preset (memories 1 to 99).
Save user preset & parameters (memories 1 to 10).
Delete a preset (memories 1 to 10).
Control and set Mute/Unmute, Gain, Delay, and Polarity (when available).
Remove group parameters defined in the LA NETWORK MANAGER software
(Name, Gain, Delay, and Contour EQ).
Select the LA8 IP address, input signal source (analog or digital), delay unit, and
LCD screen contrast.
Provide real-time temperature and RMS output voltage for each amp channel.
Display data like MAC ADDRESS, firmware and onboard preset library version.
Figure 15: Menu selection procedure
w w w . l - a c o u s t i c s . c o m
24 en