6 INSTALLATION
6.1
Mounting
The LA8 is two rack units high (2U) and can be mounted in an EIA-standard 19'' rack (Figure 6).Four mount points are
provided on the controller front panel for rack mounting. Use four screws and washers when mounting the controller
to the front rack rails.
!
During transport or while on tour it is essential that the LA8 controllers are rear supported in
addition to the front panel mounting. Use the rear rack support brackets provided with the
controller as described in Figure 7.
Any mechanical damage to LA8 controllers used in portable applications without rear support will
not be covered by warranty.
CAUTION
LA8_UM_ML_1.2
Figure 6: Controller dimensions
Figure 7: Controller and rear rack support brackets
w w w . l - a c o u s t i c s . c o m
EN
15 en