Preset Parameters - L-Acoustics LA8 Manuel Utilisateur

LA8
AMPLIFIED CONTROLLER
User Manual
VERSION 1.2
7.3.5

PRESET PARAMETERS

The PRESET PARAMETERS menu is for setting the preset parameters (Mute & Unmute, Gain, Delay and Polarity
[when available]) of each individual input (IN A & B) and output (OUT1 to OUT4) channels.
To access preset parameters, select the PRESET PARAMETERS menu and follow this procedure (see also Figure 19):
1. Turn the encoder wheel to scroll through one of the seven preset parameters.
2. To change the preset parameters to the desired value press and hold the corresponding input or output key *
and turn the encoder wheel (or press the ESC key to cancel and return to the last menu).
3. Release the key when the desired value is obtained.
4. Repeat the procedure to set another parameter or press the ESC key to return to the main menu.
* Set the input channel parameters by pressing and holding the IN A or IN B key, even if the key is not located directly
below the value displayed on screen.
In the following example the gain of input A is set at a value of 5.1 dB:
GAIN IN (dB)
0 0
DELAY IN (ms)
0 0
POLARITY IN
+ +
MUTE OUT
ON ON ON ON
GAIN OUT (dB)
0 0 0
DELAY OUT (ms)
0 0 0
POLARITY OUT
+ + +
Setting the gain value Gain values are adjustable between -60 dB and +15 dB at 0.1 dB or 1 dB resolution.
To obtain 0.1 dB resolution, simply turn the encoder wheel. To obtain 1 dB resolution, push and turn the encoder
wheel simultaneously.
Setting the delay value
0 to 35 ms/12 m/39 ft for the output channels. Delay unit can be set in the DELAY UNIT menu (see section 7.3.7).
To obtain one hundredth resolution of the displayed value simply turn the encoder wheel. To obtain one tenth
resolution of the displayed value push and turn the encoder wheel simultaneously.
Notes: Although not always displayed, decimal value for Gain and Delay settings are indicated by a dot. For example,
''5'' stands for the exact value 5, while ''5.'' stands for a value bracketed between 5.1 and 5.9. To see the actual value,
press and hold the key corresponding to the selected Input or Output channel.
Depending on the selected factory preset some parameters might be locked by L-ACOUSTICS
displays a cross (X) instead of a value.
LA8_UM_EN_1.2
Hold IN A
GAIN IN (dB)
5.1
ESC
Same sequence as for GAIN IN with either IN A or IN B keys
0
Same sequence as for GAIN IN with either OUT 1 to OUT 4 keys
0
+
Figure 19: Setting preset parameters
Delay values are adjustable from 0 to 500 ms/171 m/561 ft for the input channels and from
w w w . l - a c o u s t i c s . c o m
Release
IN A
0
GAIN IN (dB)
5. 0
® . In that case the LCD
28 en