NOTE: The appliance tabs come bent. You must bend the tab fl at by hand when fully recessing the
appliance into the wall, Figure 4.
FIG. 4
3.4.1 INSTALLING THE APPLIANCE INTO A MANTEL
A.
Remove the glass front, refer to "FRONT GLASS REMOVAL " section for removal instructions.
B.
Install the rubber feet onto the bottom of the appliance for stability, refer to "RUBBER FEET
INSTALLATION" section for instructions.
C.
Install the top and bottom brackets provided.
D.
Insert the appliance into the mantel and secure it with the brackets or refer to "ELECTRIC
FIREPLACE MANTEL" installation manual for proper appliance installation instructions.
E.
Place the crystal embers along the media tray, refer to "CRYSTAL EMBER INSTALLATION" section.
F.
Reinstall the glass front.
13
EN
W415-1542 / C / 01.13.16