Recess dimensions:
Model
RM 8501
RM 8505
RM 8551
RM 8555
RML 8551
RML 8555
Installation in the recess:
Fig. E24
Ideal fitting
Note: When installing the appliance ensure that
the door hinges are supported. Figure E24
shows the optimum installation of the refrigera−
tor, whereas Fig. E25 shows the minimum requi−
rement with the maximum clearance between
installation area and end of hinge. If the installa−
Height H
Width B
32.48"
20.74"
20.74"
32.48"
32.48"
20.74"
32.48"
20.74"
49.17"
20.82"
20.82"
49.17"
Fig. E25
Minimum requirement
11
Depth T
21.34"
21.34"
23.50"
23.50"
23.58"
23.58"
Fig. E26
Distance not greater than 40mm
tion is carried out as per Fig. E26, the hinge is
not capable of supporting the possible load in
the door. It is therefore essential that the maxi−
mum clearance of 1.57
"
not be exceeded.