Risk Of Injury; Technical Data - Steelcase Solo Sit-to-Stand Desk Mode D'emploi Succinct

Unsupervised use of the desk by children
can cause serious injury and death.
Remove and secure the mains cable when the desk is not in use.

Risk of injury or damage to the desk!
Ensure that
the desk is regularly serviced;

the desk is not used if damaged;

only spare parts are used that originate from the manufacturer. (

and contact details

Risk of injury!

Unintentional lifting or lowering of the desktop can cause injury.
For maintenance work on all non-electrical components of the desk, detach the

electrical connection of the height adjustment unit from the mains.

2. Technical data

Dimensions and weight
Temperature range at the setup location
Relative humidity
Input voltage range
Input current
Frequency range
Maximum load capacity
Maximum "ON" duration
Maximum adjustment range:
Double telescope, Lift 2
Noise emission
Power consumption in standby mode
Memory
control panel
Type plates are located on the power lift housing, on the columns, and under the
desktop near the control panel.
158069
)
Solo Sit-to-Stand Desk
See delivery note
+5°C to +35°C
5% to 80% (non-condensing)
220-240 VAC~
2.5 A
50 to 60 Hz
75 kg
2 min.
650 mm to 1250 mm
<60 dB (A)
< 0.2 W
Standard
Solo Sit-to-Stand Desk
ON OFF
/ 18 min.
see 9. Service
Rev. A
EN