Hamilton Beach 70450 Mode D'emploi page 6

Processing Using Chopping/Mixing Blade
The chopping/mixing blade can be
used to coarsely chop, finely mince,
mix, or puree food to a smooth
consistency.
1. Make sure the control switch is turned
to OFF (O) and the unit is unplugged.
2. Lock the bowl onto base. (See "How
to Lock the Bowl" on page 5.)
3. Place the chopping/mixing blade
onto motor shaft of food processor in
center of bowl. Turn slowly until blade
drops into place. Handle carefully:
the blade is sharp.
Chopping/
Mixing Blade
6
4. Lock cover onto bowl. (See "How to
Lock the Cover" on page 5.) Insert
food pusher into food chute.
5. Plug in unit and process food.
The processing time will determine
the finished consistency of the food.
The Pulse setting can help you avoid
overprocessing.
WARNING! Cut Hazard: Always use
food pusher to feed food into the chute.
Never push food through chute with
hands or fingers. Wait until blade has
stopped spinning before removing
cover.
Motor
Shaft