Attachment; Technical Data For Special 802, 803 - ALUTEC Special 802 Mode D'emploi

9.

Attachment

9.1 Technical data
for Special 802, 803
9.1.1 Connection unit
Supply voltage:
12 V DC +/- 25%
Current input:
max. 50 mA
Connection of control unit:
Female connector,
cable cross section 0.08 mm
Additional connection options:
Safety switches as normally closed contacts
(cable slack, wicket door contact, or similar)
Dimensions of door leaf housing:
approx. 170 mm x 70 mm x 40 mm (LxWxH)
Protection category
IP 65
Temperature range:
-20º C to + 60º C
72
2 – 1.5 mm 2
Manual for installation and operation, Special 802, 803 GB (#81811)
9.1.2 Optosensors
Range:
1 – 12 m
Function:
Invisible infrared light, at intervals
Response time of optosensors:
approx. 1.2 ms (total response time is dependent
on downstream evaluation system)
Switching function:
If the light path is clear, an 800 Hz dynamic signal
is generated at the output
Output:
Transistor NPN
Safety category:
in accordance with category 3
Connections for sensor seal:
System plug connection
Connection cable for sensor seal:
0.5 m to 20 m
Dimensions of sensor seal:
approx. 11.5 mm ø x 37 mm
Protection category of sensor seal:
IP 65 (in closed profile)
Temperature range:
-20º C to +60º C