ALUTEC Special 802 Mode D'emploi page 65

6. Installation
6.3.1 Mounting on the door leaf
The strain relief tie for the coiled cable can be
mounted either on the door or on the housing
connection unit.
Installation example 1
6.3.1 / 1
Installation example 2
6.3.1 / 2
• Install the strain relief
Manual for installation and operation, Special 802, 803 GB (#81811)
6.3.2 Mounting on the door frame or wall
The coiled cable must be fixed at a height equal
to half the door height.
The coiled cable can be screwed to the door
frame or to the wall using various different
bracket combinations depending on the particular
situation on site.
6.3.2 / 1
6.3.2 / 2
• Mount the coiled cable on the door frame.
Reference:
i
The correct way to connect the XP10
plug is described in the instructions
for the drive or the operating controls.
65