General Safety Advice - ALUTEC Special 802 Mode D'emploi

3.

General safety advice

Please read carefully!
Target group
This operator system may only be installed, connected and put into operation by qualified and trained
professionals!
Qualified and trained specialist personnel are persons
- who have knowledge of the general and special safety regulations,
- who have knowledge of the relevant electro-technical regulations,
- with training in the use and maintenance of suitable safety equipment,
- who are sufficiently trained and supervised by qualified electricians,
- who are able to recognise the particular hazards involved when working with electricity,
- with knowledge regarding applications of the EN 12635 standard (installation and usage requirements).
Warranty
For an operations and safety warranty, the advice in this instruction manual has to be observed.
Disregarding these warnings may lead to personal injury or material damage.
If this advice is disregarded, the manufacturer will not be liable for damages that might occur.
To avoid installation errors and damage to the door and operator system, it is imperative that the
installation instructions are followed. The system may only be used after thoroughly reading the
respective mounting and installation instructions.
The installation and operating instructions are to be given to the door system user, who must keep them
safe. They contain important advice for operation, checks and maintenance.
This item is produced according to the directives and standards mentioned in the Manufacturer's
Declaration and in the Declaration of Conformity.
The product has left the factory in perfect condition with regard to safety.
Power-operated windows, doors and gates must be checked by an expert (and this must be documented)
before they are put into operation and thereafter as required, but at least once a year.
Correct use
The closing edge safety device is a safety device for use with power operated door systems to avoid
damage to persons or property.
Beside the advice in these instructions, please observe the general safety and accident preven-
tion regulations!
Our sales and supply terms and conditions are effective.
Manual for installation and operation, Special 802, 803 GB (#81811) 57