Troubleshooting - Breville Oracle Touch Manuel D'instructions

Troubleshooting

PROBLEM
Grinder Motor
starts but no ground
coffee coming
from grind outlet
Grinder Motor
starts but operates
with a loud
'clicking' noise
Unable to lock bean
hopper into position
Portafilter overfills
Grinder
Emergency stop?
Grinder running
continuously
24
POSSIBLE CAUSE WHAT TO DO
•
No coffee beans in
bean hopper.
•
Grinder/bean
hopper is blocked.
•
Coffee bean may
have become stuck
in hopper.
•
Grinder is blocked
with foreign item or
chute is blocked.
•
Moisture
clogging grinder.
•
Coffee beans
obstructing
bean hopper
locking device.
•
Tamping fan was
removed for
cleaning and
not replaced.
•
No beans in hopper.
•
Tamping fan has
been removed.
•
Fill bean hopper with fresh coffee beans.
•
Remove bean hopper. Inspect bean hopper & grinding
burrs for blockage. Replace parts and try again.
•
Remove bean hopper, inspect burrs & remove any
foreign body.
•
Clean the burrs and grind outlet, see page 21.
•
Leave burrs to dry thoroughly before
re-assembling. It is possible to use a hair dryer to blow
air into the burr area to quicken the drying process.
•
Remove bean hopper. Clear coffee beans from top
of burrs.
Re-lock bean hopper into position.
•
Check that the tamping fan is in position and
mounted correctly to the drive shaft, see Page 21.
•
Rotate the portafilter to the left to stop the auto grind,
dose & tamp function.
•
Unplug power cord from power outlet.
•
Fill hopper with beans.
•
Rotate the portafilter to the left to stop the auto grind,
dose & tamp function.
•
Check that the tamping fan is in position and
mounted correctly to the drive shaft, see Page 21.