General Warnings And Recommendations For Correct Maintenance - hestan KDW Mode D'emploi

CLEANING AND USER MAINTENANCE
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT
MAINTENANCE
EN
The bottom filter screen can be also removed for cleaning. To remove the screen, first remove
the filter assembly and the lower spray arm as instructed on previous pages. Then gently lift the
lower screen out for cleaning.
• Clean the screen under running water (at room temperature) using a stiff brush.
• When removing the bottom screen, take care that there are no food residues on it. If any
residues fall into the sump (A ), they might block hydraulic components or foul the spray
arm nozzles.
• It is essential to thoroughly clean all the filters according to the above instructions: the
dishwasher cannot function if the filters are clogged.
• Carefully replace the filter screen and the filter assembly in their seats, to avoid damaging
the wash pump.
BEFORE PROLONGED DISUSE:
• Run the soak program twice in succession.
• Unplug the power cord from the socket.
• Fill the rinse-aid dispenser.
• Shut off the water supply valve.
• Leave the door slightly open to prevent the formation of unpleasant odors inside the
dishwasher.
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:
• Check that there are no deposits of sludge or rust inside the water pipe. If there are, allow
the water to run from the water supply for a few minutes.
• Plug the power cord back into the socket.
• Reconnect the water intake hose and open the water supply again.
30
©2019 Hestan Commercial Corporation
FILTER SCREEN
(CONT.)
A