Turning Off; Energy Management - hestan KDW Mode D'emploi

OPERATION
(CONT.)
HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy and reduces the program
duration. Place dishes in both baskets, then load the detergent dispenser (see "USING THE
RINSE-AID AND DETERGENT DISPENSERS" on page 19) less than the normal amount for
a full load. Press the Half Load
illuminates (item 11, same page).
ENERGY SAVER
This option can be selected with the wash cycle of choice to further reduce energy consumption.
Drying is aided by a special device that automatically releases the door, which opens slowly
and smoothly by about an inch. This ensures perfect drying and greater control of rinsing
temperatures, which can be kept at lower levels for significant energy saving. Once the door has
opened, the end of the wash cycle is indicated by a short beep.
Energy Saver is activated automatically every time a wash cycle is selected (except for cycles that
do not include the final drying phase) and can be disabled before the cycle is started.
When the function is activated, opening of the door must not be impeded
in any way; do not leave anything in the space in front of the door
necessary to allow it to open.
Do not re-close the door during automatic opening as this would damage the mechanism. Wait
for the mechanism to retract before re-closing the door.

TURNING OFF

At the end of the cycle, the dishwasher emits a short beep and the indicators of the fourth and
fifth cycle flash. Turn off the appliance by opening the door and pressing the ON/OFF button.
Soak

ENERGY MANAGEMENT

After 5 minutes of waiting (wash cycle completed, stopped or set but not started) the dishwasher
switches to a standby state to reduce energy consumption.
In this state, the dishwasher indicator panel (lights/display) functions more intermittently,
switching on every 5 seconds.
button (item 10 on page 10) so the the Half Load indicator
Crystal Delicate Daily Wash
Super/
Sanitize
©2019 Hestan Commercial Corporation
EN
15