Adjusting The Water Softening System - hestan KDW Mode D'emploi

OPERATION
(CONT.)

ADJUSTING THE WATER SOFTENING SYSTEM

The dishwasher's water softener can be adjusted to suit the hardness of the water it is supplied
with. The hardness is set using the
To access the setting function, hold the
indicator light flashes, while the Selected Program indicator lights show the current setting.
Each press of the Select
Crystal
Soak
Crystal
Soak
Contact your local water board for information on the hardness of your water supply.
After adjustment or display of the current setting, simply do not touch the button for a few
seconds; the dishwasher will automatically return to standard mode, ending the adjustment
mode
.
WATER HARDNESS TABLE
WATER HARDNESS
German
degrees (°dH) Degrees (°dF)
0-6
7-10
11-15
16-21
22-28
29-35
36-50
Select (program selection) button.
Select button down for 15 seconds. The ADD Salt
button changes the setting following the sequence in the table below:
Daily Wash
Delicate
Daily Wash
Delicate
French
PPM
0-11 0-107
All lights off
12-18 125-178
One light on
19-27 196-267
Two lights on
28-37 285-374
Three lights on
38-50 392-498 Four lights on
51-62 516-623 Five lights on
63-90 641-890 Two lights on
Super/
Select Salt Rinse Aid
Sanitize
Super/
Select Salt Rinse Aid
Sanitize
SETTING
©2019 Hestan Commercial Corporation
ADD
ADD
17
EN