How To Read Your Display; Check Displays - uebe cyclotest 2 plus Mode D'emploi

Operating the unit

How to read your display

You can call up and view stored information in the display with the
right Arrow button.
This is how you read the display:
Current cycle
Your 12th day in the current cycle (also indicated by a flashing bar
on the time axis)
You are in your fertile phase
On your 12th cycle day your measured wake-up temperature was
36.51 °C
Proceed as in the first cycle when inputting a new cycle start and dur-
ing the measurements.
cyclotest® 2 plus has "learned" a few things using your inputs and
measurements in relation to the first cycle.
The expected end of the fertile phase in the current cycle is indicated
– similarly to the previous cycle – in the display on the time axis.
Fig. no. 5
Display example
EN-46
Operating the unit
The expected infertile phase after ovulation begins on the 18th cycle
day: The bar chart for the time axis in this example begins at 18.
cyclotest® 2 plus can now display the highly fertile phase (2 perma-
nent babies, Fig. no. 15). In this phase, we recommend in addition
to interpreting the temperature responses that you observe and input
body symptoms.

Check displays

Note: The displays on the following pages are to be viewed as display
examples.
EN-47
Fig. no. 6
A display looks like this after the start of the
2nd cycle
Fig. no. 7
The unit performs a function test after start-
up, all the display elements are shown.
Fig. no. 8
DAY NEW: You are in your current cycle.