Frequently Asked Questions; When To Measure And How Often; Turn Off Wake-Up Alarm - uebe cyclotest 2 plus Mode D'emploi

Operating the unit
To ensure communication between cyclotest® 2 plus and your PC, you
will need the cyclotest® control software. This software contains the
drivers for the USB port and the cyclotest® program for evaluating the
stored data.
Date of printout: 31.03.2010
Serial number: 1-910-5
Cycle days
37,6
37,4
37,2
37,0
36,8
36,6
36,4
36,2
36,0
35,8
35,6
35,4
5 10 15 20 25 30 35 40
Menstruation calendar: 1st day of increased Current day
28
Cycle length in days CY input on the day
1st day of period temperature on the day
Non-fertile
04.03.2010 28 13 14
08.02.2010 25 13 13
Fertile
27.01.2010 13 13 -
12.12.2010 28 13 13 Highly fertile
01.12.2010 28 - -
24.11.2010 28 - 13
13.11.2010 28 13 -
- - - -
- - - -
- - - -
- - - -
- - - -
www.cyclotest.de Better measurement.
The cyclotest® control software with USB connecting cable is avail-
able as an accessory from all good pharmacies. Art. no. 065501, PZN
5103265.
Example of a fertility profile cre-
ated with the cyclotest® control
software.
45
EN-56

Frequently asked questions

When to measure and how often?

Once the cycle start has been input, you can take your temperature
measurements. Begin the morning after before getting up. What is
important is that you have slept for at least 5 hours and you have not
got up in the hour prior to measurement. You do not have to continue
measuring when cyclotest® 2 plus displays the long infertile phase af-
ter ovulation, i.e. no baby symbols are shown.
If one or two measurements have failed, this is not important. Simply
carry on as normal on the next day. If there are too few measurements
that can be evaluated in a cycle, the unit, to be on the safe side, dis-
plays a longer fertile phase than usual.
Important: With each initial measurement in the cycle you determine
the time window of 4 hours for the daily measurement. You can there-
fore decide anew for each cycle whether you want to stick with the
selected time or opt for a new time.

Turn off wake-up alarm

If you do not want to be disturbed, e.g. you want to have a lie-in at the
weekend, you can turn off the wake-up alarm. To do so, press the large
round Measurement button once briefly when the unit is switched off.
You will see the following display:
EN-57
Fig. no. 25
Now you do not have to continue measuring
until menstruation.