Data Recall - uebe cyclotest 2 plus Mode D'emploi

Operating the unit
It is only possible to input LH or cervical mucus information on the
middle days of a cycle.
cyclotest® 2 plus makes no distinction between whether you are ob-
serving the LH concentration or cervical mucus. You can only input one
of the two.

Data recall

cyclotest® 2 plus stores detailed data for the current and the previous
cycles as well as cycle summaries of the last 12 cycles.
Recall of detailed data in the current and previous cycles (unit is
switched off):
Briefly press the right Arrow button once. The current cycle day
appears:
Press the left Arrow button repeatedly. The previous days appear. You
can scroll back in the current and previous cycles to the respective
cycle start.
Fig. no. 20
EN-52
Operating the unit
Display examples:
Recall of cycle summaries for previous cycles (unit is switched off
or on the current cycle day):
1. Briefly press the right Arrow button twice. The following appears:
This is how you read the overview:
The digits on the left and right refer to the flashing cycle.
• Left digit: day of CY input if corresponding information was input
• Right digit: day of temperature high if a temperature high was
detected
Press and hold down the large Measurement button: the temperature
high is replaced by a display of the cycle length.
EN-53
Fig. no. 21
DAY NEW: current cycle
Fig. no. 22
DAY OLD: previous cycle
Fig. no. 23