SOMFY S&SO-RS100 io HYBRID Notice page 63

2.4.5.2. With the Somfy io-homecontrol
Position the roller shutter at its half-way position.
1)
On the io-homecontrol
2)
V
simultaneously, for ≈ 5 s, until there is back and
forth movement by the roller shutter.
Simultaneously press
3)
there is back and forth movement by the roller shutter:
The end limit settings are deleted.
→
The control points, the sensors and the favourite position
(my) are still programmed.
Resume the set-up operation (see Set-up section).
-
2.4.6. Restoring the original configuration (there are 2 possible methods)
2.4.6.1. With the wired control point and the Somfy io-homecontrol
This reset deletes all programmed control points, all sensors, all end limit settings and resets
the favourite (my) position for the drive.
Position the roller shutter at its half-way position.
1)
On the wired control point, press nine times on
2)
and press once on
movement by the roller shutter.
Press the PROG button on the Somfy io-homecontrol
3)
local control point for ≈ 7 s, until the roller shutter
makes two back and forth movements:
The drive is now reset to its original configuration.
→
Resume the set-up operation (see Set-up section).
-
2.4.6.2. With the Somfy io-homecontrol
This reset deletes all programmed control points,
all sensors, all end limit settings and resets the favourite
(my) position for the drive.
Position the roller shutter at its half-way position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to 15 seconds.
3)
Cut the power supply for 2 seconds.
4)
Switch the power supply back on: the roller shutter
5)
moves for a few seconds.
Press the PROG button on the Somfy io-homecontrol
6)
local control point for ≈ 7 s, until the roller shutter
makes two back and forth movements:
The drive is now reset to its original configuration.
→
Resume the set-up operation (see Set-up section).
-
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
local control point
®
control point, press
®
Λ my V,
, and for ≈ 2 s, until
,
until there is back and forth
local control point
®
1)
Λ
and
3)
2 S
control point
®
1) 2)
®
3)
7 S
PROG.
1)
3)
ON
5)
®
ON
6)
PROG. 7 S
EN
2)
5 S
x 9
2.5 S
my
X 2
2)
OFF
2 s
5 s
4)
OFF
15 s
2 s
my
X 2
Non contractual images.
61