Tool Features; Technical Specifications; Applications - STEINEL HG 2620 E Information De Produit

Tool features

Stainless steel outlet nozzle
1
Removable guard sleeve
2
Air inlet (including fine dust filter)
3
Soft coating for non-slip standing
4
LCD display
5
Removable cap for mounting HG Scan PRO
6
temperature scanner
Heavy-duty rubber-insulated power cord
7
Technical Specifications
Voltage
Output
Temperature
Airflow rate
Air pressure
Delivery nozzle Ø
Motor life
Heater life
Residual heat indicator
Power cord
Protection class
(without earth terminal)
Thermal cut-out
Emission sound pressure level
Total vibration value
Weight without power cord

Applications

Here are some of the applications you can use STEINEL
hot air tools for. This selection is by no means exhaustive –
no doubt you can immediately think of other examples.
- Welding bitumen.
- Welding tarpaulins and films.
- Welding PVC floor coverings and linoleum.
Guide for selecting the right type of welding rod for welding plastics
Material
Rigid PVC
Rigid PE
(HDPE)
Polyethylene
PP
Polypropylene
ABS
220-230 V, 50/60 Hz
2300 W max.
50-700 °C, continuously variable
150-500 l/min, continuously variable
4000 Pa
30mm, using Professional nozzles
approx. 10,000 hrs.
approx. 800 hrs.
Yes
H07 RN-F 2X1 3.0M
II
Yes
≤ 70dB (A)
≤ 2.5 m/s
0.84 kg
Applications
Pipes, fittings, tiles, structural sections,
technical mouldings
300 °C welding temperature
Tubs, baskets, canisters,
insulating material, piping
300 °C welding temperature
High-temperature drainpipes, seat buckets,
packagings, automotive parts
250 °C welding temperature
Automotive parts,
equipment enclosures, cases
350 °C welding temperature
ON/OFF button
8
Joystick (for setting airflow rate and temperature)
9
Button for airflow rate mode
10
Programme selector button and memory button
11
Residual heat indicator
12
Soft grip handle for comfortable operation
13
Replaceable mains power cord
14
2 / K = 0.08 m/s 2
- Working rigid thermoplastic materials in plastics and
tank construction.
- Shaping thermoplastics.
- Drying wet surfaces.
- Activating and removing glues and hot-melt adhesives.
- Drying and heating processes of all kinds.
Characteristic signs
Chars when held in flame,
pungent odour;
crashing sound
Light yellow flame, drips continue to burn,
smells of a candle being extinguished;
crashing sound
Bright flame with a blue core,
drips continue to burn, pungent odour;
crashing sound
Black, fluffy smoke,
sweet odour;
crashing sound
- 14 -
Subject to technical modifications